VEKSLER INSTRUMENTS
Glass Tube Rotameter
Home
Company Profile
Inquiry
Contact Us
Magnetic Level Indicator
Rotameter
Glass Tube Rotameter
Bypass Rotameter
Flow Switch Rotameter
Metal Tube Rotameter
Low Volume Acrylic Body Rotameter
High Volume Acrylic Body Rotameter
Rotameter Manufacturer in India
We are wellknown Rotameter Manufacturer in India. We preffered as Rotameter manufacturer in India. A Rotameter is flow rate measurement device or we can also say that Rotameter is an industrial flowmeter that measures flowrate of liquid or gas. Rotameter does not require external power or fuel, it just uses the inherent properties of the fluid, along with gravity, to measure flow rate. Rotameter consists of a tube and float.

We have different kind of Rotameters are available with best quality and also as per the required quentity. Our company Veksler Instruments is wellknown Industrial Measuring Instrument Manufacturer, Exporter & Supplier in India. We are experienced manufacturer, exporter and supplier of Rotameter in India. We have multiple types of Rotameters available as follows.
 
Rotameter Manufacturer, Exporter & Supplier in India
We are Experienced Manufacturer, Exporter & supplier of Rotameter in India. Its a pleasure to introduce ourselves as a Preferred Manufacturer, Supplier and a Leading exporter of ROTAMETERS in India since long. As a leader in this field - our ROTAMETERS are affordable and easy to operate. We provide Rotameters which are practical flow instruments for diverse metering applications.
Glass Tube Rotameter
VEKSLER (GTR-19) Glass Tube Rotameters consist of a tapered glass tube mounted vertically in a frame with the small diameter at the bottom and large end up. The tube contains a free moving float that rests on the stopper at the base of the tube. When the liquid flows, the float rises until its weight is balanced by the up thrust of the fluid and the float reaches a position of equilibrium. At this position it indicates the instantaneous rate of flow. The flow rate can be read from the adjacent scale.
View More
Bypass Rotameter
VEKSLER Bypass Rotameters are available for line sizes 2" and above. The complete assembly consists of an Orifice plate, Carrier Ring/Flanges of the main pipe line, by-pass piping with isolation valve and fittings, range orifice and the Rotameter. The Orifice calculations and design is bases on IS or BS standard. Bypass Rotameters are the most economical solution for flow measurement in large pipe lines and for large rate of flow but the use is limited to solid particles and slurries that tend to clog the range orifice and may result in malfunctioning.
View More
Flow Switch Rotameter
Click below to view more details and features of Flow Switch Rotameter.
View More
Metal Tube Rotameter
VEKSLER (MTR-19) Metal Tube Rotameters are available for use in harsher duties in liquids and gases where glass tubes are not allowed for safety reasons. These are very rugged and robust yet inexpensive for flow rate indication purposes. MTR can be used for opaque and turbid fluids at high operating temperature and pressures. The Flow is indicated by a pointer, which is magnetically coupled with the float that rises in a tapered tube with increase in flow.
View More
Low Volume Acrylic Body Rotameter
VEKSLER (ABR-19) Low Volume Acrylic Body Rotameters are designed for general non-corrosive applications and are more economical than the PR-19. The tapered metering tube is integrally machined in the solid acrylic block and the direct reading scale is engraved on the body. It incorporates all the features of PR-19 except that it cannot be used for corrosive application and for temperature above 60 Deg C. Flow range available is upto 2000 LPM for air/ gas and 2 LPM for water.
View More
High Volume Acrylic Body Rotameter
VEKSLER (ABR-191) High Volume Acrylic Body Rotameters are useful for general purpose application like water, air and inert gases. The tapered metering tube is drilled in the solid block and the scale is engraved on the body itself. The other features are similar to the GTR-19 except that it cannot be used for corrosive application and for temperature above 60 Deg C. Flow range is available from 100 to 40,000 LPH for water and 0.5 to 450 m3/hr for air
View More
Home| Company Profile| Products| Inquiry| Sitemap| Contact Us